With the aluminum inner fenders ,what is going to help strengthen the frame rails to carry the load of the torque from the solid mounted engine plate? Very nice work, I love the car !
The down bars, that will be installed once the spaces from the old shock mounts are boxed in. The down bars will be tied to the top of the coil-over mounts, as well as to the cage and firewall. Additionally, a 1" diameter bar will be hidden under the dash, tying both sides together and attaching to the firewall. This will allow for the mounting of the mid-plate hoop, which will be connected to the frame rails, effectively integrating the engine into the chassis structure. This setup will support the entire front end of the car, tying it all together. The core support and fender supports will hold only the fiberglass.