Thank you! I will check that out. Might just order two and see for myself if they’re the same from 9” through 11” once and for all…
Hard to find 10” drum brake springs
- Thread starter RandyB
- Start date
-
@toolmanmike I cross referenced the number and it keeps comin back as showing only 10” drums for 65-67 Belvedere II… might be worth a try???
I would give it a try. You only need the cable right? At least they are for 10" brakes.
When I looked them up It was 66 Dart 10" brakes.
So maybe they’re one and the same kits? With confusing and unnecessarily difficult number confusion? Haha I only need the cabbie but if the rest fits then it’ll go in as well. I’ll order one belvedere kit and one dart kit and see what we end up with. Thanks for your help!
Gibson 2101-2 shows will fit 65-68 Plymouth Barracuda and Valiant with 10 inch brakes.
New Vintage Pack of 2 Gibson 2101-2 Drum Brake Self Adjuster Cables | eBay
<p dir="ltr" style="margin-top:0; margin-bottom:0;">New Vintage Pack of 2 Gibson 2101-2 Drum Brake Self Adjuster Cables. Stored item, staining, grease on package.</p>
www.ebay.com
Hey thank you! Nice find! So something that’s been crossing my mind… I’ve read that the self adjusters can be “finicky” and somewhat problematic in adjust forward and reverse and some issues with the parking brake…
I’ve read that a few folks have actually removed the self adjusting components altogether and then just make good practice of adjusting the brakes a few times as needed… would you happen to have any experience and or feedback on that matter?
Thanks again for the link!
-
