1972 Dodge Demon 340
Time has come to sell my 72 Demon Project I’ve been working on. I’m out of time for it and about to move houses and can’t take it with me right now unfortunately. It doesn’t have the original engine or trans. It has a tone of new and good parts. Has front split bench seat with arm rest in the middle. Has the following done so far:
Decent built 318
Mild built 904
4500stall (got it with engine and trans too big)
True A Body 8 3/4 w/ 3.55 non-sure grip
Complete ACEs EFI system
New Green Bearings on axles
New Poly bushings in the front
New balljoints
New Disk Brake conversion in the front
New Super Stock springs
New Painless Wire harness 95% complete
New Carpet
New Floor Mats
New water pump
New alternator
New Aluminum Radiator
New Intake Manifold
New Headers
New Powermaster High Torque Mini Starter
New Purple Horny Mufflers
New Headlights
New Bulbs
New Rear Quarter panels installed (wasn’t done the best)
New Digital Dash
New gas tank
New Window Crank handles
Will come with a ton of spare parts too:
318 refreshed engine w/340 Cam
904 trans
Spare 8 1/4 rear
Spare 8 3/4 Axles
New Heater Core
New Intake Gasket
New Drum Brake refresh kit
Extra front grill
Extra K members
Extra Trunk Lid
Original Wire Harness
GPS Speedo for guages
GPS sensor for EFI
Spare steel wheels and hubs
HiRev box and harness for electronic ignition (if you wanted to go back to that)
Distributor
Tail light Housings
Car is solid frame wise but does need a new trunk pan and front half of floor pan and passenger Door. It will need a front windshield the one that was in it was so delaminated and foggy that it had to be taken out and I haven’t been able to get a new one ordered and put in. Other than that it’s been a great project. Engine ran great before I started doing the wiring and EFI setup. I have a few videos somewhere I just have to find them. Can go back to carb real easy as well if you don’t want EFI. Car is currently primered on the body and chassis coated on the bottom to prevent rust from starting on it. It has already had the vin inspection done in NC and just waiting for the title now. It is registered in my name already. They said it takes about 2-4 months depending on how behind they get. And it’s been 2 months already so should be any day it will be in.Asking $10000 OBO will also consider trades for something else doesn’t have to be Mopar I like Chevy and ford as well.
Time has come to sell my 72 Demon Project I’ve been working on. I’m out of time for it and about to move houses and can’t take it with me right now unfortunately. It doesn’t have the original engine or trans. It has a tone of new and good parts. Has front split bench seat with arm rest in the middle. Has the following done so far:
Decent built 318
Mild built 904
4500stall (got it with engine and trans too big)
True A Body 8 3/4 w/ 3.55 non-sure grip
Complete ACEs EFI system
New Green Bearings on axles
New Poly bushings in the front
New balljoints
New Disk Brake conversion in the front
New Super Stock springs
New Painless Wire harness 95% complete
New Carpet
New Floor Mats
New water pump
New alternator
New Aluminum Radiator
New Intake Manifold
New Headers
New Powermaster High Torque Mini Starter
New Purple Horny Mufflers
New Headlights
New Bulbs
New Rear Quarter panels installed (wasn’t done the best)
New Digital Dash
New gas tank
New Window Crank handles
Will come with a ton of spare parts too:
318 refreshed engine w/340 Cam
904 trans
Spare 8 1/4 rear
Spare 8 3/4 Axles
New Heater Core
New Intake Gasket
New Drum Brake refresh kit
Extra front grill
Extra K members
Extra Trunk Lid
Original Wire Harness
GPS Speedo for guages
GPS sensor for EFI
Spare steel wheels and hubs
HiRev box and harness for electronic ignition (if you wanted to go back to that)
Distributor
Tail light Housings
Car is solid frame wise but does need a new trunk pan and front half of floor pan and passenger Door. It will need a front windshield the one that was in it was so delaminated and foggy that it had to be taken out and I haven’t been able to get a new one ordered and put in. Other than that it’s been a great project. Engine ran great before I started doing the wiring and EFI setup. I have a few videos somewhere I just have to find them. Can go back to carb real easy as well if you don’t want EFI. Car is currently primered on the body and chassis coated on the bottom to prevent rust from starting on it. It has already had the vin inspection done in NC and just waiting for the title now. It is registered in my name already. They said it takes about 2-4 months depending on how behind they get. And it’s been 2 months already so should be any day it will be in.Asking $10000 OBO will also consider trades for something else doesn’t have to be Mopar I like Chevy and ford as well.