Hydraulic throwout bearing modifications
Well I gave her a go, and it works pretty damn good!
I machined a piece of tubing down as a sleeve to fit the ID nice and snug of the throwout bearing and a few drops of red lock tight to help hold it in place.
I then machined a lip into a lock collar I got from princess auto/harbour freight, and made a few shims out of some 1/8" alum. (Only wound up using 1 though and it gave me just under a 3/16 gap) I feel like it worked out great and saved me more than a few bucks, seeing as how the mopar ones are starting at $500, seeing as how I'm in canadia , you can double that.
Well I gave her a go, and it works pretty damn good!
I machined a piece of tubing down as a sleeve to fit the ID nice and snug of the throwout bearing and a few drops of red lock tight to help hold it in place.
I then machined a lip into a lock collar I got from princess auto/harbour freight, and made a few shims out of some 1/8" alum. (Only wound up using 1 though and it gave me just under a 3/16 gap) I feel like it worked out great and saved me more than a few bucks, seeing as how the mopar ones are starting at $500, seeing as how I'm in canadia , you can double that.