Am I Going To Be Happy With This Camshaft?

Newbomb Turk said

I don’t remember the bore, stoke and rod lengths for a slanty any more. I used to.

If you can remember that stuff and how many rpm peak power is at and I’ll do some math.

This is fun!

Click to expand...

Ok, on my long rod build sittin on the stand.
Bore- 3.445
Stroke- 4.125
Rod Length- 7.005
I don't know about peak RPM power, but the camshaft grind I chose is .495/[email protected] on a 108. FWIW, static compression is 10.5. I know dynamic will be around 8.5, but this is with the closed chamber head and flat tops with one valve trough and I can get "around" .027" quench distance. I ain't skeered to go down that far, because my red line will be 6K at the absolute most and it'll likely never see that.