Wow I was not aware of that, thank you very much for sharing. The in cap coil that is on the car uses red/yellow wires and I tested that coil using a multimeter and it tested good so I left it alone. I had not looked at the color of the pickup but since the combination of pickup coil and in-cap coil is the same as it was when it last started (3-4 years ago), it must be a good combination. But thank you anyways. I will disconnect the pickup coil leads that go to the ignition module and test with a multimeter for resistance and I know that it should be several hundred ohms of resistance. I will also make sure ground for the dist case is good.