~450hp from stock stroke 340?

I took a weight of 3200 pounds and 450 horsepower and using a chart come up with a low 11.20 quarter mile. So I went into our 11 posting area and this was way up top.




[IMG alt="mikedevore"]https://www.forabodiesonly.com/mopar/data/avatars/m/0/604.jpg?1461715951[/IMG]

mikedevore​

Well-Known Member​

JoinedJan 13, 2005Messages2,577Reaction score137LocationOklahoma
1985 360 block, bored .020 & squared.
KB107 pistons set @ zero deck / Speed Pro rings gapped per KB.
stock 340 rods (full floating pins) ARP bolts, resized
Stock crank grond @ R.010 / M.010 clevite77 bearings
Balanced
Stock oil pump / Moroso oil pan, I run 7QTS total Valvoline racing oil 10W30.
Cam; Hughes solid #HTL5256AS Lift int 572 ex 579 dur. int 252 ex 256 @ .050
hughes lifters, springs, timing set & comp push rods.
Crane ductile rockers.
out of the box Edelebrocks closed chamber / ARP bolts / .039 Victor graphite head gskts.
Holley Strip Dominator intake, 750 DP holley carb
MSD6AL box, Taylor wires, & Mopar Performance Race electronic dist. set @ 32 degrees total
Hooker 1 3/4 headers.
shift point 6500RPM
Best Et 11.28 @ 117.8 MPH
125 shot, 10.80 @ 122mph. Blowing the tires off