Timing pointers

jhnycuda said
has anyone measured the distance between the TDC points from the pre-69 (pass side marker) to the 70 and later (drivers side marker) on the balancer

VERY unscientific....

4 13/16"

I rotated my crank till it was on TDC on the 67 pointer.

I marked the damper at the 0 on the 70 up pointer.

I put some masking tape around the damper and marked the two TDC marks (should have done that first)

I took the tape off and laid it out flat and measured.

NOT accurate enough to scribe your damper but gets it in the ballpark