Thrust issues with AFR gauge and Brawler carb
P
THANK YOU for posting that graph.
One look at it and I’d have told you that you have too much emulsion. That’s what it looks like when they start slugging.
Even at 4-8 samples you can clearly see it.
Keep logging stuff. It won’t be long and you’ll be a real good carb tuner.
You can charge for that except the hard part is convincing some folks they need their carbs corrected.
Most excellent work!
Edit: at the beginning you can see about 13:1 and then it drops to a bit over 10:1 in that short of time. When I first saw that I couldn’t believe my eyes.
P
Here is graph from datalog. It was 2. gear wot acceleration from 2000 to 6000. Datalogger wasnt working properly because it took samples only 4 to 8 times per second.
I have newer played with air jets or emulsion jets before. Lot of new information to think. I appreciate your input.
THANK YOU for posting that graph.
One look at it and I’d have told you that you have too much emulsion. That’s what it looks like when they start slugging.
Even at 4-8 samples you can clearly see it.
Keep logging stuff. It won’t be long and you’ll be a real good carb tuner.
You can charge for that except the hard part is convincing some folks they need their carbs corrected.
Most excellent work!
Edit: at the beginning you can see about 13:1 and then it drops to a bit over 10:1 in that short of time. When I first saw that I couldn’t believe my eyes.