Goodbye Torqstorm, hello Spoolius Ceasar

So far I think it have a good list started... Still on the fence of how to do the throttle body. Like running a 4150 style throttle body like the edelbrock or running a 92mm LS style throttle body. Pricing is somewhat similar, but I do know the 92mm technically flows more than a 1000cfm. The 4150 style I can use my hat and not much would have to change.

MS3 Gold lite (I like the small foot print) w/ 8ft harness
Edelbrock 28155 efi super victor (or modify mine, but i wouldn't mind keeping it for another engine)
Edelbrock fuel rails
4150 throttle body with IAC, TPS
GM style IAT sensor
Thread in 3 or 4 bar map sensor
Holley 522-108x 100lb/hr injectors High impedance (MS3 Gold lite says it will run it)
RCI fuel cell drop in pump setup
465lph Fuel pump or bigger or two i dunno yet.
Boost reference regulator
5.9 magnum distributor/cam sensor (modify cap or make one)
36-1 Trigger wheel 8" universal (I can modify to weld to my current balancer)
Appropriate Sensor for crank trigger

D585 LS coils w/ brackets
Lots of wiring and connectors
Blue sea systems fuse block assembly (should work perfect for ground and 12v for the system)

there's more, but this is a start.