Ordered new pushrods from Smith Brothers. Ended up being .150” longer than the first set. Which is coincidentally the same depth as the cup in the pushrod. I suppose it’s possible that I measured overall length but told them effective length. Anyway, got everything installed and adjusted properly.
Now I’m working on the tuneup. I feel like it’s lean at at very little throttle but everywhere else is pretty close. It comes on immediately with the mash of the pedal with no hesitation and pulls hard past 6k.
Currently 20* initial, 34* total. Idles at 950rpm with 9 inches of vacuum on 93 pump gas.
Give me your opinions on these plugs. Autolite 65s.
View attachment 1716311698
View attachment 1716311699
View attachment 1716311700
View attachment 1716311701