Need help

Welcome aboard.




Regardless of what you use, you have to be sure the levers at both ends are the correct ratios.

There are trans levers that are for 4bbl carb and others for 2bbl.

Somewhere on this site is a post that shows (iirc) 4 different trans levers side by side.


JUST NUMBERS FOR EXAMPLE

Let's say the throttle shaft rotates 89 deg from closed to full open and has a 2" lever.

And the transmission has 75 deg full off to full on and a 1.5" lever.

Will the trans shaft be full on at the same time the the throttle is full open?


I assumed the aftermarket cables have worked this out if they are specked for the correct transmission and carb combo.