Cold Case Radiator what fan and shroud are you using ?
Oct. 2024....same design still. easily fixed with several ideas on this forum. Cut the shroud to fit inside the channel and remove the rivnuts, garage door seal riveted to the shroud.....or custom bend metal in shape of shroud and rivet to shroud to extend towards the radiator. the only real thing that sucks is cutting or punching rivet holes into a 200 plus dollar original Chrysler fan shroud....but i guess if you cared about that you wouldn't be putting an aluminum radiator in your car. One thing that would be good to know is which way puts the fan blades at the right depth....in the channel or extending the backside of the shroud towards the radiator.
Edit: after measuring the thickness of the radiators....the correct way is to mount the shroud with the rivnuts just like CC has it and not inside the channel. the CC radiator is thinner then the stock radiator....but guess where the rivnuts put the shroud.....right at the same thickness as the factory radiator. so i'll be making an extension to the shroud and using the rivnuts to bolt it on.