What Are You Doing To/With Your Car Today?
Exhaust install
TTI - Manifold Back, 2 ½ inch pipe.
Pretty straightforward, I had previously made a modified cross member so it was already in the car. They have a template, cut and weld.
Used mostly existing holes and brackets
Had to remove one of the e-cable guides. Hacksaw blade on a sawzall to separate it from the floorboard. I'll reattach it out of the way.
Directions were pretty good overall. Worked back to front. I chose to use my own mufflers instead of the offered ones.
Just need to trim up the last bit and fit them together. Getting the manifold brackets in place after the fact required a lot of contortion...