Cam help

Not knowing anything about your combo...I'd consider this one...

PLYMOUTH Howards Cams 718001-09 Howards Cams Rattler Camshafts | Summit Racing

With a mild combo it will be a little soft on the low end, but from a 20/25 mph roll, it'll pull like a bear to 5500/5800.
_____________________________________________________________

Just saw you had a id thread for a DP Holley and notices you have PB's. As long as you can run a good timing curve, the above cam should work fine. I'd speculate 10.5/11.0" of vacuum should be available with a minimum of 14/16 deg. initial @ 850 rpm idle.

Yes, i'm just throwing out some thoughts...:)
Does this apply in my case, I have a 4 speed.