valve lash cold

Never use that chart to adjust your valve lash. The proper way it is don on every engine every cam is this
Do every cylinder separately

1. When the exhaust valve just starts to open adjust the intake valve
2. After the intake valve opens and starts to close adjust the exhaust valve.

You will find this procedure from every cam manufacture.

I use to keep a sticker from Direct Connection similar to the one posted above. Then after I was shown how far off that procedure was I never used it again. Try it with the chart and then check it my way. You'll see.

And much easier to keep track when your not bouncing all over the rockers from one to another.

https://www.hotrod.com/how-to/comp-cams-adjusting-hydraulic-lifters/