Holley 1850 fuel transfer tube seals??

Update, no way I can get the bowls to seat with those seals, I tried 3 in 1 oil, grease, dish soap, I tried putting the seals on the tube first and pushing in the bowls, then I tried pushing the seals in the bowls first and trying to insert the tube, there is literally a good 1/2 inch of space to cinch up and I'm afraid the fragile aluminum tube will bend, I tried pushing on the carb with my body weight against the carb and the workbench, I actually thought of using a cargo strap to ratchet the bowl to the carb, there is NO way it should be that hard so I just went back to the o- rings, ( new ones ) and it just slipped together. Weird but anyway it's back together, I went through it all again I'll either throw it back on in the spring or I might try it in the next few weeks and just find a nice day to run and tune it, if it don't work I'm done with Holleys and I'll stick with Edelbrock.
Have you looked into both tube holes in both bowla to confirm there aren't some old o rings or seals stuffed up in them?