DANGEROUS PRODUCT = Moog Ball Joints

volaredon said
Well I for one have been a front end alignment guy for 20 years, last was 15 years ago...
I'll stick with what has worked for me since the 80s and that has been Moog.

15 years ago moog was still okay.

these days not so much.

i had client that insisted on moog being used for his small bolt pattern front end rebuild. so i ordered up six of everything. on the upper ball joints four of the six were acceptable, on the lowers two were. with the lower bushings one of the six was within spec. i ordered four more and two were acceptable.

their offset upper bushings are still very good and that's all i run. the bump stops are perfectly fine as well, but everything else the QC is out the window.

I'll wait for you guys to be the guinea pigs.

mevotech supreme ball joints are very decent. i've installed a ton of them and not had a lick of problems. delco gold is decent, definitely more hit than miss. proforged makes good stuff, i mostly use their lower bushings these days. dorman made in the usa is decent as well if you can find it.