67-71 Dart Gauge Cluster Gaskets
Install brake warning gasket to the bezel.
Use a razor blade to assist with removing the backing.
67-69
NOTE: The gasket is a parallelogram and should follow the opening.
70-71
Note: The right side of the gasket is slightly angled to follow the opening
Next install the Turn Signal and Oil Warning Light lenses
The lenses should be placed in the cluster open end up as shown
This is the correct way to install
This is not correct
Place the gaskets over the lenses, center as best you can.
At this point this is what you should have.
Next the ALT Gauge
Place the wider foam strip on the right side as shown
NOTE: Protect the face plate and needle, have a helper hold the gauge by the edges as you apply the gasket
CONTINUED....
Install brake warning gasket to the bezel.
Use a razor blade to assist with removing the backing.
67-69
NOTE: The gasket is a parallelogram and should follow the opening.
70-71
Note: The right side of the gasket is slightly angled to follow the opening
Next install the Turn Signal and Oil Warning Light lenses
The lenses should be placed in the cluster open end up as shown
This is the correct way to install
This is not correct
Place the gaskets over the lenses, center as best you can.
At this point this is what you should have.
Next the ALT Gauge
Place the wider foam strip on the right side as shown
NOTE: Protect the face plate and needle, have a helper hold the gauge by the edges as you apply the gasket
CONTINUED....