Dome / courtesy. These are all tied together with a common (OEM yellow) negative side, grounding switch leg. That means that when you open a door, twist the light switch, that (OEM yellow) grounds the circuit to activate the lamps. With non OEM wiring you are on your own, unless you can post the SPECIFIC DESTRUCTIONS to the harness you used. Also if you somehow got a one of those switch leg wires grounded, or the wrong socket which is already grounded (lamp shells should all be not part of that circuit OR A WRONG LAMP installed
EG the older 1004 lamps have TWO contacts for the filament. The lamp shell plays no part.
IF YOU HAVE the optional map light switch those things can eff you up