tunnel ram kickdown install question
I’ve used a Lokar cable on my tunnel ram with 660 center squirters. Depending on what carbs you use, I had to fabricate a small linkage piece to connect the cable end to.This was required to pull the cable forward while the throttle pulled the linkage rearward.
My Edelbrock intake has two 5/16 threaded holes on the back where I placed the cable mount that also needed to be fabricated. This works well, I’ve used it for 3+ years.
Like Rusty has mentioned, I am going with a mrvb this winter mainly because the 904 I bought has it already and it will eliminate the cable.
I’ve used a Lokar cable on my tunnel ram with 660 center squirters. Depending on what carbs you use, I had to fabricate a small linkage piece to connect the cable end to.This was required to pull the cable forward while the throttle pulled the linkage rearward.
My Edelbrock intake has two 5/16 threaded holes on the back where I placed the cable mount that also needed to be fabricated. This works well, I’ve used it for 3+ years.
Like Rusty has mentioned, I am going with a mrvb this winter mainly because the 904 I bought has it already and it will eliminate the cable.