Intake Fitment

This past weekend I was able to get some time on the car. So I was able to clean everything off of the intake and areas on the heads. I set the intake in position and threaded one bolt on each side of the intake to center the intake. The bolt holes appear to almost be spot on with their thread counter parts. I took the thinnest feeler gage I have (.005") and I was not able to insert the end more than about .020" in some areas.

So I believe the angles are okay with only the thickness of the intake gasket needing to come off. I will try to confirm that with the machine shop today and see when he can get me in his schedule.