Breather blow by

Mcfarlrm said
May just pull the cover and add a baffle then if that's the correct way of going about it. Figured moving the filler cap to back hole without a baffle using a push in and moving the PCV to the front hole with a baffle would suffice. Any specific baffle kit I should look at?

If you have cast valve covers I’ve had to make many baffles over the years.

For the most part they weren’t installed on the covers, they were just in the box.

Guys didn’t install them and they’d get lost.

Flat sheet metal with bends on both sides is all you need.