63 Dodge Dart, now let me see;)
Hi, feeling better, not 100% but attempting a start on the s6. I have pump shot/gas, valves adjusted according to the cam sheet, but not getting spark~ I've tried different coils, tried another ballast resistor(one on order)~ I just don't know how to troubleshoot this system. Initially, it smoked/whiffed when I turned the key off, only a couple times. Test light on the +coil is hot, the (-) side is sometimes hot, most the time not. I'm checking fire by putting a spark plug wire near ground then turning it over to start, but nothing. Now I have this terrible headache! grrrr The module was from the Duster that it came out of. Let's start here;)
I'm worried to keep turning it over, I did put a lot of red lube on the bearings. and did pour a near quart of break in oil down over the rockers and down the lifter valley.
The ballast here is 1.5-8 ohms, the other side is 5.5ish
The yellow wire; I don't have a starter relay except on the starter.
Hi, feeling better, not 100% but attempting a start on the s6. I have pump shot/gas, valves adjusted according to the cam sheet, but not getting spark~ I've tried different coils, tried another ballast resistor(one on order)~ I just don't know how to troubleshoot this system. Initially, it smoked/whiffed when I turned the key off, only a couple times. Test light on the +coil is hot, the (-) side is sometimes hot, most the time not. I'm checking fire by putting a spark plug wire near ground then turning it over to start, but nothing. Now I have this terrible headache! grrrr The module was from the Duster that it came out of. Let's start here;)
I'm worried to keep turning it over, I did put a lot of red lube on the bearings. and did pour a near quart of break in oil down over the rockers and down the lifter valley.
The ballast here is 1.5-8 ohms, the other side is 5.5ish
The yellow wire; I don't have a starter relay except on the starter.