Solid Roller camshaft selection those of you running a 408 race application - lobe seperation

rslscobra said

Yes, I will be getting a different converter as the previous owner tried one and it help with the current cam and setup. So, definitely needed. Also, seat pressure does need to increase with a new cam Trickflow heads are at 240lbs. Will be adding .060 shims to get the seat pressure up to 270lbs. Will also be upgrading the pushrods to 3/8 just because. Ty

Click to expand...

You probably have already, but if not it’d be good to make sure you have room to take 060 away, and also add whatever lift increase you’re considering.

Not sure how far you are from bind currently, but shimming with the Bullet grind will put you about 080 closer to it…I wouldn’t have been running springs that have that much wiggle room considering you’d like to be around 050-060 from bind at max lift.

Do you have a spring height mic to verify? They’re not too spendy and would give you some peace of mind.