Ball pivot clutch fork

CMKirk said

Swapping an A833 OD into a '65 Dodge Dart.

The OD bellhousing uses a ball pivot clutch fork rather than the tab mounted one, so I need a ball-pivot clutch fork.

If you have one, please let me know the length (should be around 12.5"), and the gap for the throwout bearing.

Click to expand...

IIRC the ball pivot bellhousing always had the long fork but early A-bodies always used the short fork.
I used a small block ball pivot bellhousing in a 66 Valiant and the fork travel was right in line with the torsion bar and barely cleared the torsion bar but it did work.