'64 Barracuda front brake lines

I replaced my brake lines with stainless straight lines from Inline Tube. When I had my car repainted I stripped it down and removed the front brake lines and because I installed Dougs Headers i had to reposition the proportioning valve I mounted in the left front frame rail. I was going to replace the lines from the m/c to the proportioning valve with stainless, but forming flairs with stainless tubing and bending it is difficult due to the hardness of stainless. I decided to use regular steel lines and polish them with steel wool for the stainless look. I use silicone brake fluid, so rust is not an issue. Let's not get into a DOT 3 vs 5 discussion, please.