6.1 Hemi 69 Barracuda Fastback Father Son Project
Thanks again Michael! My upper ball joints do not have the Bump.
Back to looking at these American Racing wheels again...
When ordering from Wheels for Less Reseller, they offer the "VN501" off the shelf Mono-cast 1 Piece with zero offset $, Budget friendlier...
They also sell the "AR500" a Custom 2 Piece with choice of Color, Bolt Pattern and Custom offset $$$$
Same style wheels low cost one piece cast and more expensive custom two piece...
Standard finish is Black/Machined I would order them all Matte Black as in the picture above.
*Edit, 17x9 for the rear, 17x8 for the front.
The 73 C-Body, New Yorker 11.75" rotor is 1.245" thick but the rotor overall height is .27" shorter than the standard 1" thick rotors. That is they give a narrower track by .27" per side.
So with my 73 C-Body (New Yorker Rotors), I should be able to run a 5.25" Backspace... or 5.5" BS and add spacers to move outward as needed to clear the OTR.
Much easier adjust outward by adding spacers to move the wheel out if needed.
73 New Yorker Rotor specs, thicker rotor but moves the wheel mounting surface inward by .27"
Cordoba Rotor specs
- Randy
Thanks again Michael! My upper ball joints do not have the Bump.
Back to looking at these American Racing wheels again...
When ordering from Wheels for Less Reseller, they offer the "VN501" off the shelf Mono-cast 1 Piece with zero offset $, Budget friendlier...
They also sell the "AR500" a Custom 2 Piece with choice of Color, Bolt Pattern and Custom offset $$$$
Same style wheels low cost one piece cast and more expensive custom two piece...
Standard finish is Black/Machined I would order them all Matte Black as in the picture above.
*Edit, 17x9 for the rear, 17x8 for the front.
The 73 C-Body, New Yorker 11.75" rotor is 1.245" thick but the rotor overall height is .27" shorter than the standard 1" thick rotors. That is they give a narrower track by .27" per side.
So with my 73 C-Body (New Yorker Rotors), I should be able to run a 5.25" Backspace... or 5.5" BS and add spacers to move outward as needed to clear the OTR.
Much easier adjust outward by adding spacers to move the wheel out if needed.
73 New Yorker Rotor specs, thicker rotor but moves the wheel mounting surface inward by .27"
Cordoba Rotor specs
- Randy