63 Dodge Dart, now let me see;)

I want you guys to know this is still in the rough phases of developement, I really enjoy this stuff~

The wood piece represents the future strengthening plate, this one I have to redo, but gives the idea. The wood will go between the firewall, then the plate, then the steering column keeper. I'm hoping the
I was going to put the plate on the other side of the firewall, but changed my mind.







This is where it gets a little irritating~ I'll have to make some sort of "washer" for both of these.


This is the stock Bronco II mc end. I just opened it up a tiny bit and it popped onto the nub~ it's a pain to get off. I do have mopar clutch rod retainer coming, hope it will fit onto it.





I was focusing on the depth of the clutch rod, yes I drilled extra holes too (doah), forgot to push the mc to the top of the hole, it needed that. The bolts will go through the strengtheng plate, it won't look like
this otherwise the firewall may flex without it.



The rod does travel the entire depth 1 5/8, so it should be good I hope.