Dart Sport windshield removal

If you dont have the stainless trm off yet there is a special tool (cheap on ebay) listed for GM in most cases but works once you get the hang of it.
You'll probably kill some clips but replacements are available.
Some of the gaskets are interlocking around the outside sort of like ziplock and others have a rubber cord inserted to lock. Then some have a bit of both. unlock it or remove the cord.
Thing about the sealant, it dont cooperate in temps below 70F.
Anyway the glasses go in bottom first/top last and should come out top first.
A razor blade holder type paint scraper has just enough blade exposed to push straight in and seperate the sealant from the glass all the way around inside and out. Squirt silicone like armorall in as you go or it'll just re adhere, especially in summer. Keep the razor square with the gasket. Straight in and out. An angle pull can cut the channel. We can reuse them if we dont screw them up.
Once everything seems loose and movable get a helper to help push from the inside out. Get some fingers behind the top of the gasket and help it roll in your favor. We have layed in the floor of cars with no seats and pushed the glass out with our legs/feet/shoes. Good luck