Carter AFB 9636 ?

I just purchased and installed a rebuild kit for this exact carb. According to the instructions that came in the box, the float settings are;

Float level; 5/16, float level with gasket inplace on inverted top.

Float drop; 15/16 with bowl cover held upright and gasket inplace.

Measurements are at the float ends. (Tips)

Some of those measurements seem to be for the needel and seat clearance and a slightly diffenet setting on float height and drop without the gasket inplacxe. Edelbrock may run a slightly richer setting on the floats.

I don't know what that 9/32 is for. Thats not alot of space.