Another dash removal

Why call somebody in to do something you can do yourself. It's not really that difficult to remove the windshield. You will probably want to replace the rubber seal anyway, so use a utility knife and cut away everything on the outside of the glass. Make it easier by stripping out the round pencil-size "locking strip" that is jambed into a groove molded into the gasket (if yours has this system.)

From the inside of the car, you can use a flexible putty knife to get under the glass to separate it from the bottom of the gasket (probably has sticky windshield sealant.) Be careful not to put too much pressure on the sharp edges of the glass or it might chip. Once you get it started along one edge, you can press up from underneath and it will begin to separate easier.

Work your way around carefully and have someone help you lift it out. Not as hard as you might think. Just stay off the edges as much as possible to prevent chipping.

Jerry