going DANA 60?

hi,ok, here is a simple way to put a dana 60 in. first remove the axles, they should be a 30 spline. which is the same as an 8 3/4 axle. now, measure the width, cut ends off, weld 8 3/4 ends on, install 8 3/4 axles, brakes, etc. the 8 3/4 axles are a bolt in deal. I did this to my duster. the dana 60 from a 1967 to 72 ford 1/2 ton pickup is somewhat easier and lighter. only other item is welding spring pads on in correct location.