Compression test??
OK.
Found out when I took the heads to Bobby (BJR Racing) that my 273 heads were shot. The valves was moving around in the guides and not sealing properly. So Bobby set me up with some 302 heads with new valves, springs, etc.. I changed cams and went with a .441 / .441 lift which is smaller than the .474 / .474 that I chose to run. I will have a nice running 282.41 (bored .060 over 273) with roller rockers now. By the computer I should have peak HP of 270 and peak TQ of 306.
OK.
Found out when I took the heads to Bobby (BJR Racing) that my 273 heads were shot. The valves was moving around in the guides and not sealing properly. So Bobby set me up with some 302 heads with new valves, springs, etc.. I changed cams and went with a .441 / .441 lift which is smaller than the .474 / .474 that I chose to run. I will have a nice running 282.41 (bored .060 over 273) with roller rockers now. By the computer I should have peak HP of 270 and peak TQ of 306.