My motor is smoking!

340sFastback said
Sorry to hear about your problems after you just went through all the trouble to put some good heads on there. When you had the heads off how did the cylinders look? With 30,000 miles those cylinder walls should have looked like new. You should have still seen the cross hatch pattern with no lip at the top. We know the heads you used to have on there were not rebuilt but maybe the bottom end was? I'd pull that intake and see if oil is in the intake ports of the heads. If so then you are sucking oil in from the intake to head gasket. Worth a look. Could be intake gasket and now oil is laying around in the exhaust causing lots of smoke.

I could still see the cross hatch pattern very slightly and there is a very thin lip at the top of the cylinders. I have my doubts about this engine ever been rebuilt in 06 now but I talked to the engine builder and asked a few questions. He was rude and acted like he didn't have enough time answer a few questions. The only questions I had at the time was what was the lift range of the valve springs. But he told me that the motor was rebuilt and fired up in July of 06 so I really don't know for sure.

I might take the intake off and see. I know that it is getting worse fast whatever is happening.