My motor is smoking!

Bobby,

I checked the PVC valve while the motor is running and I have vacuum and the ball is moving up and down in the PVC. Now it seems when I remove the breather/oil cap I don't not have any pulling force going into the valve cover when I place my hand over the hole on the valve cover. My breather/oil cap has oil inside it on the foam filter and has even dripped on the valve cover because there is oil on the valve cover. I have observed the inside of the valve cover while the engine is running and can see the rockers and springs moving and notice at running temperature that there is a little cloud of smoke in there but it does not come blowing out of the valve cover.

I am currently running 20w-50w VR-1 Valvoline.

I have retorqued the intake bolts to 45 ft/lbs.

How do you check the bottom of the intake with it sitting on heads with no intake gaskets? I guess on all four corners of the intake since that is the only accessible place?