Update on My 64 Dart project

Well got some things done on the Dart this past weekend. Once I got the car up in the air i decided to re-do the front brake lines for a cleaner look and get them away from the headers. As I thought, the headers are going to be a PITA!!. Not much room to work around them. Took me several hours to figure out how to mount the pivot on the bell housing. The pivot mount I got from Brewers has several holes for different applications (9.5 bell and 10.5 bell). It's all lined up now so all I need is the service kit which I ordered from Brewers yseterday. Gotta say their customer service is great and very helpfull in that I had a lot of questions about fitting their products in with the TTIs. I was also able to mock up the shifter as it relates to the hole I cut, just had to trim a little but it will work. I may have to do a little trimming on the crossmember to accomidate the Super Shifter arms which are staright vs the stock arms which have the factory fitted arms. Again, I'll try and get some better progress pictures.