That is looking good. My engine compartment is rattle can black so I need to do the same thing next winter. Did you have to pull the dash cluster to get the windshield wiper motor disconnected or could you disconnect it from the engine side?
It is removed from the car from the engine side. But first the wiper arms have to be disconnected from under the dash. The dash does not have to be removed or anything else. Use a drop light and remove the clip from the wiper arm. Once the arm has been disconnected remove the nuts that hold the wiper motor in place and wiggle it out. I had to cut the wires because there was not a harness plug so later when I go back with it I will have to solder them back together.