Good, congrads!
OK, this is good. Budget known. Is your 360 a complete engine?
What parts are missing from the engine?
Yes the engine is complete and I have a tired 318 in the car now with a 4bbl stock manifold.
On a cam, you'll need to help here a little bit on the driving RPM range of the car. OR, a gear ratio and tire size would help. Once I know this, I'll recomend a cam.
gear ratio I think is 3.23 open, tires are 15" cragars with 235 70 basic tires
On rebuild kits, click here;
http://www.summitracing.com/ and then call them up direct. They will be happy to sub out parts for others in there kits. Like pistons and cam.
The intake and carb can varry alot. Your heads, the stock OE castings, are all you'll need. I would not go to a 2.02 valve. Just back cut what is there.
If your a little bit of a do it yourselfer, a parts washer and bench top blast cabinet are very nice additions to a home shop. So is a wire/grinding wheel.