Door hinge rebuild

Yeah I rebuild the hindges on the car too. There is a lot more work involved to remove the hindge halves from the door and body.
I put a short piece of 2X4 on the floor jack and set hiegth just at the weight of the door then drive the pins out. A preplanned place to lay the door is a good idea too. If your jack doesn't leak it should be just right for rehanging the door.
You'll be drilling for a added bushing and grinding away 1/16" or so of thickness to accomodate the thrust flange on that added bushing.
Drill diameter needed ? I want to say 19/32" . Measure the bushings to be sure. Good luck