What Is A Respectable Time??

sublimeswinger said

for some reason my email turned off, so i didnt know there were so many responses. Ok so who has a proven 318 combo that is a mid 13 to low 13?

Heres mine
68-318 block bored .30
kb167 pistons set to 0
eagle I beams
76-318 stock heads port and polish,3 angle valve job shaved .20 thous. 901 springs
comp XE262 cam 262/270 duration .462/ .470 lift
EDDY 600cfm
Eddy preformer intake
Hooker comp Headers
3.23 8 3/4 rear

Click to expand...

no mention of a converter? i'd say low 14s as it sits...Low 13s? No. High 13s? Maybe, on the top of its game.

13.6 here with stock port j-heads, 9.7:1cr, eddie 650carb, .480lift/280*dur hyd cam, 3.91, 3500stall, headers, 29.5" tall slicks (wayy...way to tall).

According to the dyno it was extremely lean with that tune (since changed), shorter tires next outing, better fuel, i may run faster.. 3500stall with 3.91s on the street, even with this little engine is pretty fun