HELP Please!!!

farmer260 said

ok here is what im thinking! the clutch that came off the car looks stock! it has 23 splines! but the throwout bearing looks like one off a truck it is a bearing for a 1.25 shaft which is what i have! now what if i order a 23 spline clutch that is made for a 10.5" flywheel and then order a 1.25 bearing well they work together? the stock Dart Sport setup was a 1" bearing i believe but i can see why it wont work if i just got the bearing for the bigger shaft and used the 23 spline clutch kit from centerforce!

Click to expand...

Yeah you can do that. I don't see why the 1.25 bearing wouldn't work because there is no limiting factor in where the bearing and pressure plate come together.

Keep in mind that some pressure plates (diaphragms) require you to remove the over center spring on the clutch petal. That's why I wanted to talk to someone over the phone so he could tell me what I need (intended use) and anything else I might need to know. If I had not talked to Wayne and just ordered clutch/pressure plate there is a 99.8% chance I would have not removed the over center spring. LOL!

When you order just make sure to ask do you have to remove the over center spring with the type pressure plate that you are ordering.