Trunk Torsion Bar Adjustment

I used a pry bar. It's easier if you get in the trunk and let the deck lid down to take tension off the rod. You'll need a drop light to see what you're doing. Don't let the deck lid close, unless you have someone outside helping to let you out - or remove the latch temporarily.

Be very careful, that sucker is under a lot of tension. It will snap back if it slips off the pry bar. Put it into the holes toward the front of the car and that should work fine for holding up the heavy deck lid. We did it on my son's Dart Sport after installing a go-wing.

Jerry