68 Barracuda 440 swap parts needed

cudaman68 said
Great site guys! I have a 68 cuda I'm restoring; it’s been in the family since it was new. I’m in the process of putting a 440 in and need to round up some parts. I need the motor mounts and headers I have a 4-speed and power steering. I know you can buy them new just thought I would see if someone had them used. I need a BB bell housing I have the flywheel from my 318 that I think I can use but the clutch and pressure plate will have to be replaced. I’m also looking to upgrade the rear end from the 7 ¼ that is in the car now so I’m looking for a complete 8 ¼ or an 8 3/4. I live in Clyde, Oh 43410

The most important thing that you should think of cudaman, is that when installing a 440 into a car that was once a /6 or smallblock, is that the car has to be modified as a whole to handle the big block. That means changes in the rear end, suspension, frame stiffening, cooling, brakes, exhaust, etc. You get the picture, that 440 will find any weakness in the car. Good luck, I hope we can help, and post pictures as you go along.