Putting a Solid cam in a Hydraulic Block??

I just changed my 340 to a solid cam and lifters

I have comp cams adjustable rockers, cam and lifters. Custom pushrods were made for the proper lenght

I have a set of 915 J heads that had hardened seats and 2.02 valves installed. If the aluminum heads would have been available and as affordable then as they are now it would be a no brainer to use the aluminum Edelbrock heads.

IF, I were building a new engine now instead of fixing the problem I had I would

use a roller cam

Aluminum heads

Build it right this time you will be money ahead

and go ahead and put a stroker crank in instead of getting the stock crank turned

good luck on your build