TEST DROVE MY DUSTER W/ INDY 415

Plum360415 I run at Cordova too. I have a 416 with the 360-2 CNC ported heads prepped by Ryan Johnson at Shadydell. I basically run a stock suspension with cal's. I use QA1's in all four corners otherwise stock. The last time out I was running a pro systems 1000 cfm 4150, the carb idled clean but was set up real fat so my 60's were in the 1.7's too. I ran 11.11 at 127 mph spinning the slicks through the 1/8th and bent my perches and all 10 wheel studs. Also broke one of my leaf springs. When I got done my pinion angle was about 45+. Yeah I was doing almost 130 mph like that. LOL Now I went to a BIGS 1050 dominator and installed a turtle in the intake. I also run a 1" HVH spacer. I took it out for the first time the other night and it runs like fuel injection from 1500 rpm's to 7000 rpm's. It walks the dog for sure. Here is a video of my last run, watch for the black marks to half track. As soon as I dump the clutch the front end comes up and then the motor lays down and then just like yours it cleans up about 60 to 80 feet out and the leaves to black marks a long way. I know there is 130 mph in this set up, it will probably never ET like it would with an auto but I like to row.

http://www.mopartech.net/phpBB2/files/BRETTRUN2.wmv