Lower control arm bushings*%#@#

Here is a picture of the tool from an old add I had. I do not have pictures of it in action. My wife and son are travelling and have our digital camera so I cannot take any mock ups at this time. It worked well for me after getting the rubber out. I soaked the sleve with quality spray lubricant and let it sit for a while. Then I inserted the sections and it came up without any problems. I did one half way then stopped. I informed myself on the use of poly bushings and I understand I should leave the sleve in the control arm if using the poly busing. I pressed the sleve back in with a large vice.

Good luck!