Lower control arm bushings*%#@#

Here are the instructions that go with the tool. As mentioned in the instructions it works with the other tool in the kit that removes the control arm pivot.

Drop the beveled machine screw down into the bushing. Drop in the 2 halves flared side down. Thread on the dual sided female coupling . Thread on the long threaded rod that comes with the pivot remover to the other side of the female coupling. Lower the pivot remover tube over the threaded rod assembly. Place a washer over the threaded rod. thread on a nut onto the threaded rod and use a socket and power bar or large ratchet socket wrench to tighten the nut and lift the sleeve up.

It worked well for me.