Stormin,
The size rivets I used was to long but I already had those. I just nipped them off with the Dremel after I riveted. I would use 1/8" dia with 1/4" grip range. I had 1/2" grip range.
The original studs was shot! They striped or broke off. I came up with using a 3/4 long screw and a flat thing (I just can't remember the name of those things LOL!) to hold the screw in place. It will not let the screw turn after you tighten it up.
Originally Posted by REDFISH Nice work neighbor I used a trim fastener nearly identical to what holds the 2 narrow trunk trims on. Cadium plated #10-24 X 3/4. Ordered from mrgusa.com Once they are trapped between the parts they can't go anywhere or turn. Stainless flat washers, lock washers, and nuts.
The hardware Mullinax used works too. Any alternative may cause problems if and when the grilles are removed again. Then so did the OEM fasteners.
Clearcoat will take away from the reflection / shine. Not even the windshield can stand up to the sandblasting created on the road so repeated waxing might be the best plan
