Which Electronic Distributor Would You Recommend

Here's my experience with the Mopar Performance kit I bought for my 383 from Summit. Of course this was before I new about this website.
I hooked everthing up for the first time. Car wouldn't start, no spark. Started checking the wiring etc., got to the ballast resistor, no resistance at all. Called Mopar Performance customer service number, asked if they would send a replacement. Guy said you have to box everything up and send it back to where I bought it! Screw that! I already got the distibuter in and wired. I'll put my old one back on, I said maybe they should check the quality of their parts a lot closer. He said sorry. Then I said you should check your instructions in your manual because the distributer rotation is in the oposite direction of what it should be! He didn't know what to say....In frustration I hung up, thinking I may never by another part from them.
Luckily, my next door neighbor came over with his Clayton manual and found my wires out of order. Once we got that straightened out the car started.

One problem I had which would say was MY fault was that the orange electronic box I had installed was bolted to the inner fender. One day I went out to start the car it was dead, no spark! Now what? It turns out the grounding from the box to the fender was not enough. So I moved it to the back and attached that braided ground wire to it that goes to the motor.

I dont know what luck other have had with Mopar Performance but it seems the quality and servive is not so good.

Kim.